Enter the Matrix of the new Max Pro NEO Hairdryer.

This professional hair dryer uses the latest revolutionary technology and takes blow-drying hair to an even higher level. With its LED interface you can easily set the correct temperature and blowing speeds. In addition, NEO hair dryer with brushless electric motor and 2100W is perfect for professional use. This hair dryer blows an impressive 16 liters of air per second. This speeds up drying time up to 3 times compared to traditional hairdryers, increases performance and extends motor life.

The NEO hair dryer is supplied as standard with a diffuser and no fewer than two nozzles (93mm and 63mm). The nozzles dry and style the hair using a soft, wide airflow. The diffuser, on the other hand, spreads the air evenly around the hair to create beautiful, frizz-free curls.

Suggested MSRP $299.99

To enjoy the Max Pro NEO hairdryer for as long as possible, proper maintenance is an essential step. By regularly maintaining the NEO hair dryer you get the most out of the hair dryer. That is why the NEO hair dryer has a self-cleaning function.

Read below how to activate the self-cleaning function of the NEO hair dryer:

• Turn the hairdryer on and off.
• Remove the filter at the back.
• Press the cool shot and temperature buttons at the same time.
• After a few seconds, the hair dryer automatically blows back and stops again on its own.

The Max Pro Multi Airstyler is the ultimate multifunctional hair styling tool for everyday use, which dries your hair while styling. With the four different attachments you can create the most diverse looks in no time. The powerful 1200W motor and five different temperature and speed settings ensure maximum control and minimal heat damage.

Whether you go for curls, straight hair, classic volume or trendy beach waves: it’s all possible with the Max Pro Multi Airstyler. Of course with a shiny result.

Suggested MSRP $129.99

How to Use:

• Wash your hair with shampoo and conditioner. Rinse the hair thoroughly. Use a towel on the hair to remove excess moisture. Divide your hair into sections. Use the hair dryer along with a styling brush to direct hot air through one section of hair at a time. Move the hair dryer evenly over each section, allowing the warm air to flow through the hair. Make sure there is a direct airflow on the hair and not on the scalp.
• Keep the dryer vents clear of the hair and blow dryer.
• To prevent overdrying, do not concentrate the heat on any one section for too long. Keep the dryer moving while you blow dry.
• For quick styling, dampen hair with a little water before applying to the attachment.
• When using the dryer to create curls and waves, dry the hair almost completely on the hottest setting and finish styling on the lower setting. This ensures that your hairstyle lasts a long time.
• This dryer has a holder for a concentrator. Use the concentrator if you want to focus the drying power on a small area (such as a curl or a wave) or if you want to relax curly hair.

Do you want a full bunch of curls but still want to vary? This curling iron has five different attachments (18/9mm, 19mm, 25mm, 25/19mm & 32/25mm) so you can always go for a different curl. With this multifunctional curling iron you can create both a loose stroke and tight curls. Thanks to the ceramic rod and the short curling time (3 sec), the hair is not or hardly damaged. In addition, the temperature switch allows you to maintain control over the heat [adjustable between 80°C – 220°C], which is displayed via an LCD display. The temperature switch and the five different sizes of attachments make the Max Pro Miracle 5in1 suitable for every – both long and short – hair type and popular among professionals; hairdressers and hair stylists.

Unique to the 5in1 is that the attachments of this curling iron are not equipped with a click system, but with a rotating system. This is less sensitive, which improves the quality of the 5in1 compared to other complete curling irons. Each size of rod [ceramic] provides the hair with a different type of curl. The narrower the bar, the smaller the curl. The rods with a narrower end ensure a natural course of the curl.

The supplied glove is heat-resistant with which you can easily wrap the hair strands around the hot ceramic rod without bandaging yourself. Within 4 seconds the curling iron is warm and ready for use. The Miracle 5 in 1 switches off automatically after one hour of non-use.

This tool has a lifetime warranty after registration on www.maxprohair.com , provided you register the product within 30 days of purchase.

Suggested MSRP $199.99

How to Use:

• Always make sure your hair is clean and dry before using the curling iron.
• Make sure there is no water on the floor or other surfaces near the outlet or the curling iron.
• Plug the curling iron into the wall socket. The curling iron may have a polarized plug with one blade wider than the other. If this is the case, this plug will only fit into an outlet if it is correctly positioned. If the plug does not fit into an outlet, make sure you insert the large pin into the correct hole. If you cannot connect the plug without difficulty, contact an electrician; never try to force the plug into a socket.
• Press the “ON/OFF” button on the top of the curling iron until the temperature is shown on the display. The hair styling tool will heat up immediately, but it will take about 40 seconds for it to reach optimal uniform heat distribution.
• When the curling iron is up to temperature, you can set the desired temperature with the +/- button at the top of the hair styling tool. The most commonly used temperature is 180 degrees, but this depends on the type of hair.
• Put on the supplied heat resistant gloves. Avoid any contact between the wand and the skin when the hair styling tool is in the “ON” position. The rod is hot and can cause burns. In addition, pay close attention to your ears when turning or moving the curling iron, because you can not only burn your scalp and hands.
• Divide the hair and start with long hair with the lower strands at the bottom of your head. You can place the curling iron at the beginning of a strand and place it around the curling iron (a guideline with any technique is that when you turn inward you create more curls. And when you turn outward you create more volume), make sure make sure the hair is flat on the barrel. Then wrap the rest of the lock around the rod. This way the hair is well distributed, the heat is evenly distributed throughout your hair and every part of the strand forms the right shape. After 3 seconds of warming up, drop the lock into your palm and let it cool for 3 seconds before releasing. Cooling down is a very important step for longevity of the curls. Always start at the bottom and then grab a lock that is higher. The closer your curling iron is to your roots, the more curls you’ll get in your hair. If you want a lot of curls or waves, start with the curling iron close to the roots of your hair. However, always be careful not to burn your scalp. If you only want curls at shoulder height, rotate the curling iron from the middle of the hair lengths.
• Finished? Press the ‘ON/OFF’ button until the temperature is no longer shown on the display. Unplug and allow the hair styling tool to cool completely on a heat-resistant surface before storing. Never leave the styling tool plugged in or switched on when you are not there.

Your hair will always look good with the Max Pro XS Straightener. This compact hair straightener is specially designed for short hair and is the ideal travel accessory. The small 100% titanium plates ensure that you can easily reach the hair roots and do not damage your hair.

As a result, the straightener gives volume and body to shorter hairstyles and tames frizzy hair. The Max Pro XS Straightener uses active negative ion technology, which provides extra shine and protection. And with its universal plug you can use it anywhere in the world.

This tool has a lifetime warranty after registration at www.maxprohair.com provided you register the product within 30 days of purchase.

Suggested MSRP $49.99

How to Use:

• Always make sure your hair is completely clean and dry before using the straightener.
• Make sure there is no water on the floor or other surfaces near the exhaust or hair styling tool.
• Plug the hair straightener into the wall socket. The hair straightener may have a polarized plug, with one pin wider than the other. If this is the case, this plug will only fit into an electrical outlet if it is properly installed. If the plug does not fit into an electrical outlet, make sure you insert the large pin into the correct hole. If you cannot connect the plug without problems, contact an electrician; never attempt to force the plug into an electrical outlet.
• Plug the styling tool into an electrical outlet and press the “ON/OFF” button on the inside of the handle until the temperature shows on the display.
• The hair styling tool immediately becomes very hot, but it takes about 40 seconds for it to achieve optimal even heat distribution.
• The hair styling tool gets very hot, so make sure it does not come into contact with the skin.
• Allow your hair to cool before touching or brushing it.
• After styling your hair, turn off the hair styling tool by turning the switch inside to the “OFF” position, unplug the power cord and allow the hair styling tool to cool completely on a heat-resistant surface before storing. Never leave the styling tool plugged in or turned on when you are not there.